What is a slab leak?
A slab leak is a leak in a water line that runs under or through the concrete slab a home is built on. Many Valley homes are slab-on-grade, so their supply lines sit under the floor where you can't see them. When one of those lines leaks, the water soaks into the soil or comes up through the floor.
Before you call, you can run a quick meter test at home. Here is how to find a water leak in your house, step by step.
Why Slab Leaks Are Common in Phoenix Homes
Most homes in the Valley are built slab-on-grade, with the water lines running under or through the concrete. That alone makes slab leaks more common here than in parts of the country where homes sit over a basement or crawl space. Our water adds to it. Phoenix water is hard, and over the years it can wear small pinholes in copper pipe. Hot water lines usually go first, which is why a warm spot on a tile floor is so often the first thing people notice.
A few other things we see on slab leak repair calls in Phoenix:
- Pipe rubbing on concrete. Water lines expand and contract as they heat up and cool down. Over years, a line that touches concrete or rebar can wear through at that spot.
- High water pressure. Every pipe in the house is under more stress when the pressure runs high. A pressure gauge from the hardware store, screwed onto a hose bib, tells you where you stand. Above 80 psi is worth asking us about.
- A line that has already leaked once. When one spot on an old line fails, another spot on the same line is often not far behind. That is usually when a reroute starts to make more sense than another spot repair.
If you think you have a slab leak, run the meter test first, then call (602) 767-5343. We find the leak before any concrete is opened.
Slab leak detection without guesswork
Opening concrete is the expensive part, so accuracy matters most. We isolate the leaking line with pressure testing, trace where it runs with an electronic line locator, then pinpoint the leak with acoustic equipment and thermal imaging. You get a written report of what we found, with photos.
Slab leak repair options
Spot repair: we open the slab at the leak, repair the pipe and close it back up. Often the most direct fix when the rest of the line is in good shape.
Reroute (bypass): we abandon the leaking section and run a new line through walls or the attic, so the slab stays closed. Often a good choice when a line has failed more than once, or the leak sits under hard-to-replace flooring.
Repipe: we replace a section of the plumbing or the whole home's supply lines. Worth considering when the pipes are aging and leaks keep coming back.
Epoxy pipe lining: we coat the existing pipe from the inside, which can avoid opening floors in suitable situations.
We'll tell you which options fit your home and why. Then you choose. Every repair carries our 2-year parts and labor warranty.
Related services: Leak Detection & Repair and Water Line Leak Repair.
What happens when our slab leak plumber comes out
Most slab leak calls in Phoenix start the same way. Someone feels a warm spot on the floor, hears water running, or opens a water bill that makes no sense. Here is what the visit looks like once you call (602) 767-5343.
- Confirm the leak. We check the meter and rule out the easy causes first, like a running toilet or a leaking irrigation valve.
- Find the line. Pressure testing tells us whether the hot side or the cold side is losing water.
- Pinpoint it. We trace the line under the slab and find the leak with acoustic equipment and thermal imaging.
- Show you what we found. You get a written report with photos and a free estimate* for each repair option that makes sense for your home.
Nothing gets opened until you have seen what we found and picked a repair. If you are not sure the leak is under the slab, start with our leak detection service. If the meter keeps moving after you close the main valve at the house, the leak may be in the yard line instead, and our water line leak repair page explains that job.
*Diagnostic fee may apply.